Utilicor > Utilibond Data

Utilibond Data

Download: Utilibond Brochure

Download: Utilibond TwinPack Brochure

Download: Utilibond Data / Application

Download: Utilibond MSDS

Download: The Complete Golder Report

Download: The Complete Dr. Lange Utilibond Report

Cold Weather Utilibond Reinstatement Instructions

Warm Weather Utilibond Reinstatement Instructions.

Utilicor Keyhole Coring Equipment & Parts Catalogue

Utilibond - General Information

Preparation

Remove all loose dirt and particulate from the cut surface. Wipe the cut surface of the core and substrate with a clean damp cloth. To achieve maximum bridging strength the core should be bedded on a 1 inch layer of clean 10mm (3/8") pea gravel.

Mixing

For optimum strength Utilibond™ should be mixed with .53 US gallon (2 L) of clean water to 44 lbs (20 kg) bag. Open the Utilibond™ pail. Remove the bag of Utilibond™ from the pail. Add 0.53 US gallon (2 L) of clean water to the pail. Add the Utilibond mixture to the water in the pail while mixing. Mix for 3 minutes until you have a smooth consistent mixture with no lumps. (For best results use a universal power mixer).

Curing

Utilibond™ will begin to cure in less than 15 minutes @ 70°F/21°C. Be sure all surface areas are properly prepared before mixing.

Bond Strength

Utilibond’s super-fast strength gain yields a bond strength equal to five times the AASHTO H-25 load bearing standard or more than 50,000 lbs. in 30 minutes. This allows the roadway to be opened to traffic within half an hour of the reinstatement.

Limitations

Not recommended for structural bonding applications.
Not suitable for acid exposure.
Maximum surface temperature 350°F (176°C).
Minimum kerf thickness 3/8" 9.5mm.

Coverage

Up to an 18" diameter by 18" deep core replacement per 44lb (20 kg) bag.

Standards

Approved for use in reinstatement of keyhole pavement cores.

Packaging

Utilibond™ is packaged in 44lb (20 kg) multi- wall bags in a 5 US gallon (18.9 L) sealed polyethylene pail, or two 22lb (10 kg) bags in the Twin Pack format.

Clean Up

Clean all mixers and tools with water before product hardens.

Storage

Inside or outside storage.

Shelf Life

Two year shelf life when stored in original packaging, unopened.

Safety Precautions

Consult Material Safety Data Sheet (M.S.D.S.) for specific instructions. MSDS # 216.

Download: Utilibond MSDS

Warranty

The recommendations made and the information herein are based on our own laboratory and field experience, and are believed to be accurate under controlled conditions. However, no warranty or guarantee of accuracy is made because we cannot cover, nor anticipate, every variation encountered in weather and job-conditions, methods used and types of substrates to which the product is applied. The users should make their own tests to determine the suitability of this product for their purposes Utilicor™ makes no other warranty, express or implied, and hereby expressly disclaims a warranty of merchantability or fitness for a particular purpose.

The liability of Utilicor™ shall be limited in all events to supplying sufficient product to re-treat and/or repair the specific reinstatement for which Utilibond™ product has been used. Utilicor™ reserves the right to have the true cause of any difficulty or failure determined by accepted test methods. Utilicor™ shall have no other liability, including liability for incidental, consequential or resultant damages, however caused, whether due to breach of warranty, negligence, or strict liability.